Carpet Pro Commercial Uprig...
$9.99
Product details
Wrapped cord on a Carpet Pro CPU-2T commercial machine rides against a small clip on its body between passes, and part B352-6900 is what that clip looks like once it needs replacing.
The identical piece turns up on the Titan TC6000, the Fuller Brush FBP-14PW, the Clean Max CMPSQD, and across the CP-ULW and ZM-400 lines. Sitting low on the housing, exactly where a machine tends to bump against doorways and carts as it moves between rooms, means one sharp pull on a fully wrapped cord is often all it takes to break the tab off. From there, nothing holds the loop in place, so the cord slides loose in storage, hangs low enough to drag under the wheels, and gradually splits its jacket from being rolled over.
A commercial cleaning crew wraps and unwraps this cord dozens of times across a single shift, often handed off between different people with different habits, and that sheer repetition wears the clip out well ahead of the rest of the machine's plastic. Anyone in a hurry moving room to room is also more likely to grab and pull the cord free rather than unhook it deliberately, and that grab-and-pull motion is precisely the load the clip is least able to survive.
Snapping the replacement into place takes only a couple of minutes, and it spares the cord itself, by far the pricier component, from the wear that follows once nothing is holding it up off the floor.
- Part: B352-6900, cord clip
- Fits: Carpet Pro CPU-2T, CP-ULW, ZM-400, Fuller Brush FBP-14PW, Clean Max CMPSQD, Titan TC6000
- Function: holds the wrapped power cord against the body between uses
- Replace when: the clip has snapped off and the cord no longer stays wrapped
- Prevent repeat failure: unhook the cord before pulling rather than yanking it free