SEBO Handle Grip Set for FE...
$34.00
Product details
SEBO's FELIX drawing puts the complete handle at position 21 and gives it a different number in every finish. 7164DB is the dark blue one, the Indigo colourway, and it arrives as a set rather than as a single moulding: two grip halves, the grommet, the clamp and the screws that pull the assembly onto the handle tube.
The grip takes every load the machine ever puts into a hand — lifting it up a staircase, hauling it sideways past a chair leg, leaning on it while the head is worked under a bed. All of that ends up at the clamp, so failures start there. The clamp loosens, the two halves begin to move against each other, and a seam opens into a crack that runs out from a screw hole. Fitting both halves at once keeps the clamping force even across the tube and the colour consistent from one side to the other, which a single replacement half never quite manages on a coloured machine.
Two neighbouring parts get mistaken for this one. If the machine will not lock upright or will not release, the item in question is the handle release button at position 25, supplied colour-matched as 7082DB in dark blue. If the tube itself is bent, that is the handle tube at position 11, part 7081ER. The rest of the dark blue trim on the same sheet runs 7027DB for the cable hook, 7038DB for the switch assembly, 70166SE for the lower housing and 7095ER39 for the indigo exhaust filter, so a machine being tidied up can be done as a set.
- Fits: SEBO FELIX Premium in the dark blue Indigo finish
- Colour: dark blue
- Pack: two grip halves, grommet, clamp and screws
- Part number: 7164DB, diagram position 21 on the FELIX sheet
- Replace when: the grip is cracked, twists on the tube, or the clamp will not stay tight
Anyone searching for a FELIX Premium handle replacement in dark blue is looking for this number. Ships in 2-5 business days.