Hoover BreathEasy Upright D...
$9.99
Product details
Part 38656033 is the duct cover on Hoover BreathEasy-series uprights, the small panel that closes off the internal channel carrying air from the nozzle back to the bag chamber. That channel only works if it stays sealed the whole way, so once the cover cracks or a corner breaks off, air starts leaking out before it ever reaches the bag.
The result is a machine that feels weaker at the floor even though the motor sounds normal. Dust that should land in the bag drifts out through the gap instead, so you end up chasing a mess the vacuum should have caught. None of that points to a worn belt, a dirty brush roll, or an empty bag, since the fault sits upstream of all three, in a plastic cover most owners rarely think to check. Plastic housing parts on machines of this age also grow brittle from years of ordinary warming and cooling in use, so a cover that still looks intact but flexes more than it should is often further along than it appears.
Fitting the replacement closes the channel back up and returns suction to where it belongs. It seats the same way the original part did, so there is nothing to trim or adjust.
- Part: 38656033, Hoover BreathEasy upright duct cover
- Function: seals the air path between nozzle and bag chamber
- Fits: U5242930, U5243960, U5244930, U5248930, U5250930, U5251900, U5252930, U5253900, U5254900, U5256900, U5258900, U5264930, U5270930, U52719RM, U5280900, U5288900, U5290900, U5294900, U5298900
- Symptom it fixes: weak floor suction with a clean bag and working belt and brush roll
Check the model plate against the list above before ordering, since several of these model numbers look nearly identical from the outside.