Oreck
Oreck Main PCB Board - LW100 Magnesium Upright
Oreck Main PCB Board - LW100 Magnesium Upright
SKU:83045-01
Low stock: 9 left
Couldn't load pickup availability
Shipping Information
Shipping Information
We offer free standard shipping on eligible orders of $100 or more within the 48 contiguous United States. Eligibility is calculated on the merchandise subtotal after discounts and before tax.
Most in-stock orders using standard shipping are processed within 1-5 business days, and most arrive 2-11 business days after they are placed. Backordered and special-order items may take longer. Expedited UPS Ground is available at checkout for an extra charge, including on orders that qualify for free standard shipping. See our Shipping Policy for details.
Returns & Exchanges
Returns & Exchanges
We offer 35-day returns on eligible items: request a Return Authorization (RA#) within 35 days of delivery, and your return must reach us within 21 days after the RA# is issued.
Items must be unused, in new condition, and in original packaging with all accessories. For non-defective returns you pay return shipping; original shipping charges are not refunded, and if your order shipped free our actual outbound shipping cost is deducted from the refund. There is no standard restocking fee. See our Return & Refund Policy for details and exclusions.
Warranty Information
Warranty Information
All products sold by Vacuums and More come with the manufacturer's warranty. Warranty terms vary by brand and product.
With 35 years of industry experience, we stand behind every product we sell. Contact us for warranty support.
Fits the same machines
Oreck Main PCB Board - LW10...
$61.99
Product details
Part 83045-01 is the main circuit board inside the Oreck LW100 Magnesium upright, wired into the path connecting the switch to the motor and governing how the machine reacts every time that switch is pressed. Everything about how the motor starts, runs and responds to the operator flows through this one board rather than through any purely mechanical linkage.
A failing board rarely quits outright on its first bad moment. More commonly the vacuum runs for a while, stalls without warning, then starts again with no obvious cause to point to. Other times power drops out whenever the cord gets nudged or the handle is jostled during use, or the machine goes completely silent on an outlet already tested and confirmed live, with a cord and a physical switch that both check out fine on inspection. That inconsistency, rather than a single decisive failure, is the pattern that separates a board issue from a problem elsewhere in the electrical path.
Because this is board-level work inside a mains-powered appliance, disconnect the machine from power and keep it that way for the entire repair, and hand the job to a service technician if there is any hesitation about tackling it directly. Photograph the position of every wire before lifting the old board free, since a lead reconnected to the wrong terminal can leave the new board performing no better than the failing one it replaced. Take the time to test each function of the machine once the new board is seated, before the housing goes back together for good, so any remaining wiring mistake is caught while everything is still easy to reach.
- Part: 83045-01
- Function: main control board governing motor response to the switch
- Fits: LW100 Magnesium
- Signs of failure: intermittent cutting out, unreliable starting, no response with a good cord and switch