SEBO Screw C 2.9 x 9.5 (DIN...
$6.99
Product details
The shortest of the 2.9 mm tapping screws used through the SEBO X range, the C 2.9 x 9.5 to DIN 7981 secures light covers and internal brackets on the X1, X2, X4 and X5 uprights. DIN 7981 sets the form: a cross-recessed pan head on a self-tapping thread, so the screw cuts its own path into the plastic boss beneath and needs no nut behind it. It is stocked singly under part 100, which means a repair needing one screw does not mean buying a packet.
Two things finish a fastener this size. The first is a driver that slips and rounds out the cross recess until nothing will grip it. The second is a plastic boss opened up by too many removals, so the thread has nothing fresh left to cut. Either way the screw stops pulling the panel down, the cover lifts at a corner, and the machine develops a rattle over hard floors that no amount of retightening will cure.
- Part number: 100
- Fits: SEBO X1, X2, X4 and X5
- Specification: C 2.9 x 9.5 to DIN 7981
- Head and drive: cross-recessed pan head
- Size: 2.9 mm diameter, 9.5 mm long
- Thread: self-tapping, cuts into the moulded boss
- Sold: each
- Longer 2.9 mm screws: part 107 at 13 mm and part 1000 at 16 mm
Measure what you took out rather than judging by eye. SEBO uses 2.9 mm screws in several lengths on the same machine and every one of them carries the same head, so a 9.5 mm and a 13 mm are indistinguishable once they are loose in a tray. Start the new screw by hand for the first turn so it follows the path already cut in the plastic instead of carving a second one alongside it.
This is the part for anyone searching a SEBO X4 cover screw, a DIN 7981 2.9 x 9.5 replacement or a genuine SEBO X series fastener. Genuine SEBO hardware from an authorized dealer, dispatched in 2-5 business days.