SEBO Complete Swivel Neck f...
$44.00
Product details
Light gray version of the ET-1 neck, part 2307HG arrives as one finished assembly rather than a bag of loose components. SEBO places it at position 113 in the FELIX parts diagram, described there as the complete swivel neck assembly.
This is the articulating link between floor head and tube. It carries the airflow, the electrical feed to the brush drive and the entire steering load of the machine, which explains why a worn one produces such varied complaints. Heavy or notchy turning, a head that refuses to lie down for under-furniture work, and brush drive that cuts in and out as the joint flexes are all the same underlying fault seen from different angles. The electrical symptom is usually the one that decides it: if the roll stops and starts as the head is swung left and right, the conductors inside the neck have fatigued at the bend.
Replacing the neck as a unit deals with the pivot and the wiring path in one operation, with no bushings or clips to reuse from the old part. Photograph the lead routing before removal so the replacement goes back the same way, and inspect the two neck supports on either flank at the same time, since a fractured brace mimics a worn neck almost exactly. SEBO lists this light gray assembly for the FELIX Premium, AIRBELT E3 Premium and AIRBELT K3 Premium; the gray black equivalent is 2307GS. Those two are the ordering decision on this part, so check the finish of the neck currently on the machine rather than matching by outline, and note that the supports on either flank are common to both colours.
- Fits the SEBO FELIX Premium, AIRBELT E3 Premium and AIRBELT K3 Premium
- Suits ET-1 power heads built with or without an on/off rocker
- Part number: 2307HG
- Colour: light gray
- Diagram position: 113, FELIX parts list
- Supplied as one complete assembly, no bushings to reuse
- Related numbers: 2311 and 2312 swivel neck supports
- Related number: 2307GS in gray black
Genuine SEBO part. Ships in 2-5 business days.