Trovac Vaculine 30-Degree M...
$6.99
Product details
Part TF5519BV turns a central vacuum PVC run through a shallow 30-degree angle. A medium-radius bend at this shallow an angle suits a small course correction around framing rather than a full 45 or 90-degree turn, and it keeps the change in direction gradual enough that airflow through the pipe stays smooth.
- Angle: 30 degrees
- Radius: medium
- Material: PVC
- Brand: Vaculine
Reach for a shallow-angle elbow like this one when a run needs to sidestep a joist or duct without the flow resistance of a sharper bend; two small shallow turns are generally easier on airflow than one sharp turn over the same offset. Bond it into your run using PVC cement made for central vacuum pipe.
Dry-fit any elbow before cementing, since PVC solvent weld sets almost immediately and will not allow the joint to be twisted back into alignment afterward. A shallow-angle elbow like this one is easy to overlook when planning a run, but a couple of small offsets are often gentler on airflow than saving the whole correction for one sharp turn later in the line.
Confirm the fitting's pipe diameter matches your existing central vacuum tubing before ordering part TF5519BV. Verified against: Trovac catalogue listing for the Vaculine 30-degree medium-radius elbow