Wessel-Werk EBK360 Electric...
$231.99
Product details
The Wessel-Werk EBK360 in black, part TABA4300, is a German-built electric power nozzle for a central vacuum hose or wand, sold here without the wand attached.
Wessel-Werk builds the EBK360 with a geared drive belt rather than a plain rubber belt, backed by sealed, permanently lubricated bearings, so there is no belt tension to check and no bearings to grease over the working life of the nozzle. A 250-max-watt motor drives the brushroll and is protected by a built-in overload cutout that trips if the roll jams on a cord or a heavy tangle of hair, rather than letting the motor keep pulling current against a stalled brush. A 180-degree swivel neck lets the head turn under a couch or chair without lifting and repositioning the whole body, a high-output LED headlight throws light onto the floor ahead of the nozzle so grit along a baseboard stays visible, and a non-marking bumper runs the front edge so it can work close to furniture legs without scuffing them. Height is set by a pedal offering five carpet settings, and the geared belt drive is built to run vibration-free and quietly.
- Part: TABA4300
- Cleaning width: 360 mm (14 in.)
- Motor: up to 250 watts, with built-in overload protection
- Drive: geared belt, sealed lifetime-lubricated bearings
- Weight: about 5.9 lbs
Sold without a wand, so it needs an electric wand made for the EBK360 to complete a working hose-and-wand setup. Wessel-Werk publishes the EBK360 at a 360 mm cleaning width, the widest in its electro-brush range, with a five-setting height pedal, a cogged belt and an LED headlight, and that page is the source for those figures here.
Verified against: Wessel-Werk product page for the EBK360 electro brush