SEBO Bottom Casing for AIRB...
$53.00
Product details
Underneath a graphite SEBO AIRBELT E3 Premium sits 8335GSER, the lower body moulding that everything inside the canister is built onto. It carries the castors, takes the weight of the machine, and forms the face you are looking at whenever the vacuum is tipped over for service.
Cracks tend to start at a corner or around a screw boss after a drop, and once the plastic has let go the internals lose their anchor and the shell stops closing evenly along the seam. Renewing the base corrects both without disturbing another component — the vac motor, the pre-motor filter box 8322AM and the bag chamber all move across to the new moulding, so the repair is a strip and rebuild rather than a rewire.
Two numbers sit seven digits apart and are easy to transpose in a hurry: 8335GSER is the graphite base, 8328GSER is the graphite top casing, and GS is the shade code they share. If the damage is on the visible upper face of the machine rather than the underside, it is the 8328 number you want. Confirm the finish on your own canister either way, because every shade in the range has a separate part number behind it.
Fitting is mechanical rather than electrical. The internals unbolt from the old base and mount onto the new one, and the top casing then closes down against it. Reuse the existing fixings where they are sound; where one has stripped, SEBO lists the screws as their own line items, singly and in ten-packs, so 0103 or 0103ER covers the 3.9 x 16 size. Searches for a SEBO base moulding, a graphite AIRBELT E3 Premium underside, or the bare number 8335GSER all point at this component.
- Fitment: SEBO AIRBELT E3 Premium
- Shade: graphite
- Part number: 8335GSER
- Supplied as: the bottom moulding on its own
- Mounts to: the top casing, closing along the body seam
- Matching upper half: 8328GSER
Genuine SEBO service part, ships in 2-5 business days.