SEBO
SEBO Right Bearing Block for ET-H Power Head
SEBO Right Bearing Block for ET-H Power Head
SKU:2751DG
Couldn't load pickup availability
Shipping Information
Shipping Information
We offer free standard shipping on eligible orders of $100 or more within the 48 contiguous United States. Eligibility is calculated on the merchandise subtotal after discounts and before tax.
Most in-stock orders using standard shipping are processed within 1-5 business days, and most arrive 2-11 business days after they are placed. Backordered and special-order items may take longer. Expedited UPS Ground is available at checkout for an extra charge, including on orders that qualify for free standard shipping. See our Shipping Policy for details.
Returns & Exchanges
Returns & Exchanges
We offer 35-day returns on eligible items: request a Return Authorization (RA#) within 35 days of delivery, and your return must reach us within 21 days after the RA# is issued.
Items must be unused, in new condition, and in original packaging with all accessories. For non-defective returns you pay return shipping; original shipping charges are not refunded, and if your order shipped free our actual outbound shipping cost is deducted from the refund. There is no standard restocking fee. See our Return & Refund Policy for details and exclusions.
Warranty Information
Warranty Information
All products sold by Vacuums and More come with the manufacturer's warranty. Warranty terms vary by brand and product.
With 35 years of industry experience, we stand behind every product we sell. Contact us for warranty support.
Fits the same machines
SEBO Right Bearing Block fo...
$24.99
Product details
A grinding or rattling note from one end of the roller on an ET-H power head is nearly always the bearing block rather than the roller itself. Part 2751DG is the right-side block: the moulded carrier that captures the brush roller shaft and holds it square inside the nozzle.
- Right-hand bearing block for the SEBO ET-H power head
- Locates and supports one end of the brush roller shaft
- Cures roller wobble, side drag and uneven brush strip wear
- Comes out and goes back with the roller lifted from the nozzle
- Genuine SEBO component, ordered as 2751DG
Once the bore wears oval the roller sits low on that side. The brush strips then scuff unevenly, which you can read directly off the roller as one end worn shorter than the other, the belt tracks off centre, and the motor works against the drag all the while. Left long enough, a roller running out of line will chew through belts at a rate that is far more annoying than the original fault.
Checking it takes a moment with the machine unplugged and the head turned over: grip the roller at the right-hand end and try to move it up and down in its seat. Any perceptible play is the block, not the roller. A block that has cracked rather than worn is usually visible as soon as the roller is lifted out.
Fitting it is a roller-out repair. Lift the brush roller clear, transfer the block, and clean the shaft end and the seat before the new one goes in, since grit packed into the bore is what wore the old block in the first place. Check the roller ends for hair wound tight against the bearing while you have it out.
Inspect the opposite end at the same time, since both ends have seen the same hours, and look over the brush drive belt 2750 while the nozzle is open. Searches for a SEBO ET-H bearing block, an ET-H roller bearing right or genuine SEBO 2751DG land here.