SEBO
SEBO 345 mm Handle Tube for AUTOMATIC X and ESSENTIAL G Uprights
SEBO 345 mm Handle Tube for AUTOMATIC X and ESSENTIAL G Uprights
SKU:5187
Couldn't load pickup availability
Shipping Information
Shipping Information
We offer free standard shipping on eligible orders of $100 or more within the 48 contiguous United States. Eligibility is calculated on the merchandise subtotal after discounts and before tax.
Most in-stock orders using standard shipping are processed within 1-5 business days, and most arrive 2-11 business days after they are placed. Backordered and special-order items may take longer. Expedited UPS Ground is available at checkout for an extra charge, including on orders that qualify for free standard shipping. See our Shipping Policy for details.
Returns & Exchanges
Returns & Exchanges
We offer 35-day returns on eligible items: request a Return Authorization (RA#) within 35 days of delivery, and your return must reach us within 21 days after the RA# is issued.
Items must be unused, in new condition, and in original packaging with all accessories. For non-defective returns you pay return shipping; original shipping charges are not refunded, and if your order shipped free our actual outbound shipping cost is deducted from the refund. There is no standard restocking fee. See our Return & Refund Policy for details and exclusions.
Warranty Information
Warranty Information
All products sold by Vacuums and More come with the manufacturer's warranty. Warranty terms vary by brand and product.
With 35 years of industry experience, we stand behind every product we sell. Contact us for warranty support.
Fits the same machines
SEBO 345 mm Handle Tube for...
$14.00
Product details
Measuring 345 mm, this is the upper handle tube that carries the grip on SEBO's AUTOMATIC X and ESSENTIAL G uprights, and 5187 is the factory number for it. It is more than a piece of tube: it sets the geometry of the handle, takes the load every time the machine is reclined or lifted, and houses the wiring run travelling between the grip switches and the body below.
Tubes bend rather than break. Dragging a vacuum along by its handle, tipping it hard onto a stair edge, or catching the grip on a door frame all put a set into the metal, and a bowed tube then binds where it enters the neck. The handle stops reclining cleanly, the machine feels stiff at the moment it should drop back, and the pivot at the base wears faster because it is being loaded off axis. A straight replacement restores the original geometry and takes that strain back out of the joint.
- Part number: 5187
- Length: 345 mm
- Fits: AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium, X7 Pet and X8
- Also fits: ESSENTIAL G1, G2, G4 and G5
- Diagram position: 13, handle tube, on the ESSENTIAL G4/G5 parts breakdown
- Sold as: one tube
- Related part number: 5162, the cable clamp at position 8 that anchors the cord to the handle tube
Feed the cable through carefully during reassembly and refit the clamp — a loom left loose inside a new tube chafes on the cut edge every time the handle is raised or laid back. A straightedge laid along the old tube will usually confirm the bend that the eye alone was not sure about. Anyone searching for a SEBO handle tube, a 345 mm upright handle rod or an AUTOMATIC X handle replacement has arrived at the right number.
Genuine SEBO stock from an authorized dealer; ships in 2-5 business days.