TurboCat Air-Driven 35' Low...
$340.99
Product details
This 35 foot low-voltage kit is built around a TurboCat nozzle that runs entirely on the central vacuum's own suction, with no motor or power cord in the nozzle housing. It is catalogued as SKU 11207LG.
The TurboCat is Cen-Tec's air-driven central vacuum powerhead, about 12.5 inches wide, and it converts vacuum airflow into brush roll rotation, so the harder the central vacuum pulls at that inlet, the more aggressively the brush agitates carpet. That also means it depends on a clear, unobstructed hose and a healthy vacuum unit to perform well, and any drop in system suction shows up immediately as weaker cleaning at the nozzle. The head is a long-running air-driven design carried under several names over the years, so belts and wear parts remain easy to find.
At 35 feet the hose has enough slack to reach across most rooms from a single wall inlet without repositioning partway through a room, and low-voltage wiring inside the hose runs the on/off switch at the handle. Use plain extension wands rather than button-lock wands with this head. Before ordering, confirm your system takes low-voltage hose ends rather than a direct-connect fitting, since the two styles are not interchangeable and mixing them will not seat properly at the inlet.
- Nozzle: TurboCat, air driven, about 12.5 inches wide, no motor or cord
- Hose: 35 feet, low-voltage, handle on/off switch
- Wands: use plain, non-button-lock extension wands
- Fit: standard low-voltage central vacuum inlets; verify your inlet and hose-end style before ordering
- SKU: 11207LG